How to Install the X Series Brake Rotor (MD1003X) – Step-by-Step Guide for Optimal Performance
Introduction
The X Series Brake Rotor (MD1003X) is engineered for superior stopping power and heat dissipation, making it ideal for high-performance ATVs, UTVs, and off-road vehicles. This guide walks you through professional installation to ensure safety and longevity.
Tools Required
-
Socket set (10mm–17mm)
-
Torque wrench
-
Brake cleaner
-
Anti-seize compound
-
Wheel chocks
Step-by-Step Installation
-
Safety First: Secure the vehicle on a lift or jack stands and remove the wheel.
-
Remove the Old Rotor: Unbolt the caliper and slide it off without straining the brake line.
-
Clean the Hub: Use brake cleaner to remove debris and apply anti-seize to the hub surface.
-
Install the MD1003X Rotor: Align the rotor with the wheel studs and secure it. Torque bolts to 25–30 Nm.
-
Reassemble & Test: Reattach the caliper, pump the brakes, and test for proper engagement.
Pro Tip: Bed-in new rotors with 5–10 gradual stops to avoid warping.
Where to Buy:
