Weldments

HUB FOR STEEL DISC
1″ ID x 1-7/8″ OD x 1/2″ wide,
two 5/16-18 set screw holes,
and 1/4″ keyway
8236
HUB FOR STEEL DISC
1-1/4″ ID x 1-7/8″ OD x 1/2″ wide,
two 5/16-18 set screw holes,
and 1/4″ keyway
8636
HUB, 3/4″ BORE, STEPPED
3/4″ ID x 1-1/2″ OD x 2-3/4″ long, 1/4″
x 1-5/16″ OD Shoulder, 3/16″ keyway &
5/16-18 Set Screw Hole opposite
8234
HUB, 1″ BORE, STEPPED
1″ ID X 1-1/2 OD X 2.75″ long, with
1/4″ x 1-5/16″ OD shoulder. 1/4″ key-
way with set screw hole opposite

8237

HUB, 1″ BORE
1″ ID x 1-1/2″ OD x 1-1/2″ long.
5/16-18 set screw with 1/4″ keyway

8239

HUB (Weldable Steel Sleeve), 1″ BORE
1″ ID x 1-3/8″ OD x 2-1/2″ long with 1/4″ keyway

8299

TUBE, TAPERED BEARING HUB
2″ OD x 1.782″ ID x 3-5/8″ long
8238
TUBE, BEARING HUB
1-5/8″ OD x 1-3/8″ ID x 3-1/2″ long
8230
BEARING HANGER, 3/4″ AXLE
3-13/16″ Square x 1/4″ thick, 5/16″
holes for 2 & 3 hole flangettes
8126
BEARING HANGER, 1″ AXLE
3-1/2″ Square x 1/4″ thick, 5/16″
holes for 2 & 3 hole flangettes
8127
BEARING HANGER, 1-1/4″ AXLE
4″ x 4-1/4″ x 1/4″ thick. 5/16″ holes
for 2 & 3 hole flangettes
8130
BEARING HANGER, JACKSHAFT
1-3/8″ ID x 3″ OD with 2″ mount-
ing edge x 1/4″ thick
8128
SPINDLE ARM, (SIDE 1)
3-3/4″ x 1″ with support wedge
x 1/8″ thick with 5/16″ bolt hole
8172
SPINDLE ARM, (SIDE 2)
3-3/4″ x 1″ with support wedge
(opposite from side one) x 1/8″ thick
with 5/16″ bolt hole
8173
SPINDLE BRACKET, 5/8″ KINGPIN
2-1/2″ between ears, 1-1/4″ clearance
to bolt centerline. 1/4″ thick
x 1-3/16″ wide. For 5/8″ Kingpin.
8171
SPINDLE BRACKET, 1/2″ KINGPIN
2-1/2″ between ears, 1-1/4″ clearance
to bolt centerline. 1/4″ thick
x 1-3/16″ wide. For 1/2″ Kingpin.
8181
SPINDLE AXLES, UNPLATED:
5/8-18 x 3.75″
8445
5/8-18 x 4.50″
8457
5/8-18 x 6.00″
8472
3/4-16 x 3.75″
8444
3/4-16 x 4.50″
8458
3/4-16 x 6.00″
8471
PITMAN ARMS
5/8″ shaft hole, 5/16″ bolt hole,
5 ga. (.210″), 1-5/8″ center to
center with 3/16″ offset
8129
ROD ANCHOR
1-3/8″ x 3/4″ x .160″ thick
with 1/4″ hole.
8182
ROD ANCHOR
1-3/8″ x 3/4″ x .375″ thick
with 1/4″ hole.
8176
STEEL DISC
4-7/8″ OD, 1-5/16″ bore, 4 holes on 4″
bolt circle, 1/4″ thick
8178
STEEL DISC
5″ OD, 1-1/2″ bore, 4 holes on 4″
bolt circle, .165″ thick
8195
STEEL MOUNTING BRACKET
5-1/2″ x 1″ x 1/8″ Thick, Three 3/8″holes. 1.75″ on center
8198
ENGINE MOUNTING PLATE
5″ x 12″, Flat (Dimensions)
8190
ENGINE MOUNTING PLATE
5″ x 12″, Flat, Heavy (Dimensions)
8199
ENGINE MOUNTING PLATE
8-3/4″ x 7-3/4″, with Lips (Dimensions)
8191
ENGINE SWING MOUNT PLATE
(Dimensions)
8155